3. Reclining Position Adjustment Pulling up left lever (3, Figure 227) allows seat backrest to be moved forward or backward. Sit with your back against the seat back when adjusting it. If your back is not touching the seat back, the seat back may suddenly move forward. 4. Lumbar Support Adjustment A lumbar support is located in the seat back. 5 Turn the dial (4, Figure 227) counterclockwise to increase the force of the lumbar support. 5. Headrest 4 3 6 The headrest (5, Figure 227) can be adjusted forward/ backward and up/down. Move it by holding both sides. FG015815 Figure 227 6.
Seat Belt WARNING AVOID DEATH OR SERIOUS INJURY The seat belt is for the operator's safety and should always be worn for operator restraint. Before driving the machine, adjust the seat to the desired position for maximum comfort and machine control, then fasten the seat belt. Seat belts must be worn across the pelvic region and adjusted snugly to lessen the chance and severity of injury in case of an accident. Never fasten a seat belt across the abdomen. Under no circumstances should the operator be standing in the cabin when operating the excavator. Do not adjust the seat position while the vehicle is moving because a loss of control can result.
Stop the machine, apply the parking brake, and then adjust the seat. Always check the condition of seat belt and belt bracket before fastening it. Do not use seat belt with twists in it or with damaged or with missing hardware. Replace belt or bracket if damaged or worn. DX225LC-3 Operating Controls 2-84