Doosan DX225LC-3 — Front Upper Window

FRONT WINDOWS WARNING AVOID DEATH OR SERIOUS INJURY Unlock When leaving operator's seat, move safety lever to "LOCK" position (Figure 236) and stop engine to prevent accidental activation of the work levers and controls. EX1300566 Figure 236 Lock Front Upper Window The front upper window can be housed in cabin's ceiling. Opening Window WARNING AVOID DEATH OR SERIOUS INJURY 2 When storing front window in cabin roof, make sure both lock levers (2, Figure 237) are securely latched. 1. Lower bucket or work tool to ground. 1 FG015835 2. Move safety lever (Figure 236) to "LOCK" position. Figure 237 3. Set engine speed control dial to "LOW IDLE". Allow engine to idle for three - five minutes. 4.

Stop engine by turning key to "O" (OFF) position. 5. Hold window handles (1, Figure 237), then pull lock levers (2, Figure 237) to release lock. The top of front window will come out. 6. Pull window up, and push it against lock pin at the rear of cabin. Make sure that it is securely latched. 7. Check that lock levers are securely latched in locked position. NOTE: When front upper window is open, never extend your head or body through window frame. NOTE: If window happens to fall against machine, while some part of your body is extended outside cabin, it can result in serious personal injury. NOTE: The front window is spring loaded to help ease opening it.

To fastening rear lock pin, hold handle and fasten rear lock pin. DX225LC-3 Operating Controls 2-88