Doosan DX225LC-3 — Closing Ceiling Cover

CEILING COVER NOTE: If machine is equipped with an optional transparent ceiling cover, never use any chemical cleaners on its surface. Only use warm water to wash dust and dirt from its surfaces and, after that, dry it with a soft fabric towel. Opening Ceiling Cover 1. Lower bucket or work tool to ground. 2. Move safety lever (Figure 234) to "LOCK" position. 3. Pull lock (1, Figure 235) in front center of ceiling cover and push it up with handle. Unlock EX1300566 Figure 234 Lock Closing Ceiling Cover 1. Lower bucket or work tool to ground. 2. Move safety lever (Figure 234) to "LOCK" position. 3.

Pull down cover with handle (Figure 235) so lock (1, Figure 235) can be locked into bracket in ceiling frame. FG015834 1 Figure 235 Operating Controls 2-87 DX225LC-3