Change Machine Control Pattern By Selector Valve (If Equipped) 1 5 4 3 8 7 WARNING 2 6 Check surrounding area before swinging. When operating a lever while in auto idle, proceed with caution because the engine speed will increase rapidly. Keep bystanders away. AVOID DEATH OR SERIOUS INJURY FG018404 NOTE: When starting work, move work levers (joysticks) slowly and check movement of swing and front attachment. Figure 66 The machine control pattern can easily be changed to the ISO pattern or to the BHL pattern by changing the position of the selector valve (if equipped). Use the following procedure to change the position of the select valve.
The selector valve is located in the rear of the cabin. 1. Rotate spool to the ISO position or to BHL position. 2. A control pattern symbol shows on the display screen. BHL ISO BHL ISO SELECTOR VALVE SELECTOR VALVE AM AM H H H H E rpm F E rpm F C C C C Min Max s DIG ISO USB Min Max s DIG BHL USB FG018374 Figure 67 DX225LC-3 Operation 3-36