Doosan DX225LC-3 — Intelligent Floating Boom Mode

Intelligent Floating Boom Control (Optional) NOTE: 1. The boom operating joystick must be in "NEUTRAL" position before operating the Intelligent Floating Boom mode selector switch. 2. If the tracks are raised up, do not select and use the Intelligent Floating Boom mode. This could cause the tracks to suddenly lower resulting in death or serious injury. 3. When the boom operating joystick is in boom lowering position and the bucket or other attachment is in contact with the ground, do not use Intelligent Floating Boom mode (temporary reset button).

If the tracks are raised and the Intelligent Floating Boom mode has been selected, pressing the temporary reset button can cause a tip over when the boom lowering control is activated at the same time. See “9. Intelligent Floating Boom Switch (Optional)” on page 2-11 for further information. Intelligent Floating Boom Mode The boom can move freely "UP" and "DOWN" when any external force up or down is applied to the boom. Applications like using a breaker attachment, leveling, or stone gathering are easier and more convenient. WARNING AVOID DEATH OR SERIOUS INJURY FG018446 Death or serious injury can result from failure to follow the proper procedures.

Figure 71 While the front of the machine is elevated by front linkage, NEVER activate the Floating mode function and using the work tool joystick control. It could result in unexpected machine motion and serious injury or death. To avoid the possibility of death or serious injury, follow the established procedures. DX225LC-3 Operation 3-38