Operating a Breaker The boom can freely move "DOWN". The breaker can be operated with only the weight of the work group on the front without additional force, resulting in less shock and vibration, and extended service life of the breaker. The breaker will remain in constant contact with the object. FG018447 Figure 72 Truck Loading Boom lowering can be controlled without hydraulic pump flow discharge, increasing productivity and fuel efficiency. FG018448 Figure 73 1. Intelligent Floating Boom Mode To select the Intelligent Floating Boom mode, set the Intelligent Floating Boom selector switch from "O" (NORMAL MODE) to "I" (INTELLIGENT FLOATING BOOM MODE).
O I II Moving joystick in boom-down direction after selecting Intelligent Floating Boom mode will lower boom by using its own weight, and the boom will move upwards naturally by external load forces. NOTE: When the Intelligent Floating Boom selector switch is in "O" (NORMAL MODE) position, the Intelligent Floating Boom will not operate. Figure 74 FG018272 2. Breaker Mode PM To select the breaker mode, set the Intelligent Floating Boom selector switch from "O" (NORMAL MODE) to "II" (BREAKER MODE). Moving joystick in boom-down direction, the boom will be lowered by its own weight.
H H E F However, the boom upward movement is not smooth in breaker mode where the operator must move the joystick in boom rising direction. C C rpm Min Max s DIG ISO USB NOTE: When the Intelligent Floating Boom selector switch is in "O" (NORMAL MODE) position, the Intelligent Floating Boom will not operate. FG018591 Figure 75 Operation 3-39 DX225LC-3