Doosan DX225LC-3 — Leveling Blade (Optional)

3. Temporary Reset Button If the Intelligent Floating Boom temporary reset button on the joystick is pressed, additional downward force can be exerted when lowering the boom during Intelligent Floating Boom operation. FG027214 Figure 76 Leveling Blade (Optional) If the machine is equipped with the optional leveling blade, the leveling blade control lever is on the left control stand. To lower blade, "PUSH" lever forward. To raise blade, "PULL" lever backwards. Whenever leveling blade is being used to level ground, make sure to set travel speed control to "LOW SPEED". Attempting to use leveling blade in "HIGH-SPEED" will cause damage to drive system. 2 1 1. Blade down FG021706 Figure 77 2.

Blade up WARNING AVOID DEATH OR SERIOUS INJURY Check the blade location before traveling. When the blade is to the rear, operate the steering levers/foot pedals in the opposite direction to when the blade is in the front. 1 2 Move the steering levers/foot pedals slowly. Abrupt lever motion will cause the machine to jerk. FG021707 Figure 78 DX225LC-3 Operation 3-40