ATTACHMENTS Bucket Replacement and Reversal IMPORTANT Mounting in reverse direction can result in interference during operation, and is not recommended. WARNING AVOID DEATH OR SERIOUS INJURY When pins are knocked in with a hammer, pieces of metal may fly and cause serious injury. When performing this operation, always wear goggles, hard hat, gloves, and other protective equipment. When the bucket is removed, place it in a stable condition. If pins are struck with a hammer, there is a potential hazard that they can fly out and injure a bystander. Make sure there is no one in the surrounding area before starting the operation. When removing the pins, do not stand behind the bucket.
Do not put your foot under the bucket while standing at the side for the work. When removing or inserting pins, be careful not to get your fingers caught. Never insert your fingers into the pinholes when aligning the holes. Stop the machine on a firm and flat surface and do the work. When performing joint work, appoint a lead and follow that person's instructions and signals. DX225LC-3 Operation 3-52