Shear Operation (Optional) WARNING AVOID DEATH OR SERIOUS INJURY Do not operate or work on this work tool unless you have read and understand the instructions and warnings given in this manual for both the work tool and the machine. Failure to follow the instructions or heed the warnings could result in death or serious injury. Contact your DOOSAN distributor for replacement manuals. Proper care and maintenance is your responsibility. NOTE: Selection of a hydraulic shear must be done with extra care. Use of a hydraulic shear not recommended by DOOSAN could result in structural damage to the machine. Consult your DOOSAN distributor for hydraulic shear information.
Be sure that no one is near the work tool to prevent injury. Keep the work tool under control at all times to prevent injury. When a demolition tool is used, all personnel should maintain a minimum distance of 10 m (33 ft). Close all windows. Make sure that all required operator protective guards are in place. Wear all required personal protective equipment. Follow the instructions given in this manual for the work tool. WARNING AVOID DEATH OR SERIOUS INJURY Death or serious injury could occur from the demolition of pipes, vessels, tanks or other containers that may contain gas, flammable materials, or hazardous chemicals.
Do not perform any demolition work on these items until all of their contents have been removed. Follow all laws and regulations for the removal and disposal of these materials. DX225LC-3 Operation 3-60