Quick Coupler Operation (Optional) Securing Work Tool WARNING AVOID DEATH OR SERIOUS INJURY The following safety instructions are for your safety, the safety of bystanders, and to prevent property damage. Read the descriptions before using the machine and make sure you are familiar with all safety notices. Hydraulic quick couplers must be installed, operated, inspected, serviced, maintained and repaired by qualified, appropriately trained and experienced people only. Ensure that the work tool or bucket is not carrying a load. If work tool or bucket is on unstable position or carrying a load, it may cause serious accident. The buzzer will sound unless the coupler is not locked.
Perform physical test by dragging the attachment on the ground to confirm the coupler pins are engaged. Do not operate the machine if there are other workers or people in the work area. Also, never allow people to stand or pass under the bucket or attachment for any reason. Do not start or perform any work unless you are property trained. You should understand how to use the device according to the instructions. Make sure that device is correctly and securely engaged every time you change working tools or attachments. Perform the recommend daily check for safe operation. Attaching Quick Coupler to Excavator 1. Place the excavator and quick coupler on the level ground. 2.
Retract the bucket cylinder. Align the quick coupler between the hinges of the work tool. Figure 131 FG019086 DX225LC-3 Operation 3-64