Doosan DX225LC-3 — Attaching Quick Coupler to Excavator

3. Move the arm (1, Figure 132) forward and raise it until hook (2, Figure 132) engages the hinges of work tool. 1 2 FG019087 Figure 132 4. Set quick coupler switch to "I" (UNLOCK) position. NOTE: To remove holding pin, maintain hydraulic relief condition for 2 - 3 seconds in bucket crowd position with the switch turned on. NOTE: Whenever the hitch part is extended, a warning alarm will sound. When setting switch to "O" (LOCK) position, the warning alarm will stop. O I 5. Extend the bucket cylinder to move hitch part of quick coupler to bucket pin side. FG019088 Figure 133 6. Set quick coupler switch to "O" (LOCK) position. 7. Retract the bucket cylinder to attach the hitch completely. 8.

Check that hitch is engaged and the work tool is properly locked before operating. NOTE: Insert safety pin (Figure 135) after completion. O I FG019089 Figure 134 Push Type Pull Type FG022357 Figure 135 Operation 3-65 DX225LC-3