Doosan DX225LC-3 — Coolant and Water for Dilution

Coolant and Water for Dilution The coolant has the important function of preventing corrosion and preventing freezing. Even in areas where freezing is not an issue, use of antifreeze coolant is essential. DOOSAN machines are supplied with DOOSAN coolant. DOOSAN coolant has excellent anticorrosion, antifreeze and cooling properties and can be used continuously for 1 year or 2,000 hours. Therefore, it is recommended to use authorized genuine DOOSAN antifreeze solution. When using DOOSAN coolant, there is no need to use a corrosion resistor. For details, see “Engine Cooling System” on page 4-92. When diluting antifreeze coolant, use distilled water.

Natural water, such as a river water or well water (hard water), contains large amounts of minerals (calcium, magnesium, etc.), and this makes it easier for scale to form inside engine or radiator. Once scale is deposited inside engine or radiator, it is extremely difficult to remove. If tap water needs to be used, refer to “Engine Cooling System” on page 4-92 for further information on standards and precautions. When using antifreeze, always observe precautions given in this manual. Antifreeze coolant is flammable, so be sure to keep it away from any flame. The ratio of DOOSAN coolant to water differs according to ambient temperature.

For details of ratio when mixing, see “Antifreeze Concentration Tables” on page 4-94. DOOSAN coolant may be supplied premixed. Never add distilled water. If engine overheats, wait for engine to cool before adding coolant. If coolant level is low, it will cause overheating and corrosion problems because of air entering coolant. Never mix lime (hard water), salt or water contained metal material with coolant. Inspection, Maintenance and Adjustment 4-11 DX225LC-3