10 HOUR / DAILY SERVICE Grease Boom, Arm and Front Attachment Pins (for first 100 hours) Grease every 10 hours for first 100 hours and every 50 or 250 hours thereafter (See page 4-36). NOTE: If the unit has been running or working in water, the front attachment must be greased daily. Check Engine Oil Level WARNING 2 Allow engine to cool before checking oil level to avoid burn injury. AVOID DEATH OR SERIOUS INJURY 1 NOTE: When checking level, use a dipstick and always remove and wipe it clean before making final level check. 1. Stop engine and wait for fifteen minutes. This will allow all oil to drain back to oil pan. Figure 12 FG019987 2.
Remove dipstick (1, Figure 12) and wipe the oil off with a clean cloth. 3. Insert dipstick fully in oil gauge tube, then take it out again. 4. Engine oil level must be between "HIGH" and "LOW" marks on dipstick. L H NOTE: If oil is above "HIGH" mark on dipstick, oil must be drained to return oil to proper level. 5. Add oil through engine oil fill cap (2, Figure 12), if the oil level is below the "LOW" mark. FG000616 Figure 13 DX225LC-3 Inspection, Maintenance and Adjustment 4-24