Check Level of Window Washer Liquid 1. Open left front access door and check fluid level in windshield washer tank. 2. Open fill cap and add fluid. NOTE: Use a washer liquid that is rated for all seasons. This will prevent freezing during cold weather operation. FG020184 Figure 29 Inspect Bucket Teeth and Side Cutters for Signs of Wear 1 2 1. Inspect the bucket teeth daily to make sure that tooth wear or breakage has not developed. 2. Do not allow the replaceable bucket teeth to wear down to the point that bucket adapter is exposed. See Figure 30. 3 NOTE: These instructions are only for DOOSAN OEM buckets. If you are using other manufacturers' buckets, refer to their specific instructions.
Figure 30 HAOE870L Inspect Cooling Fan Blade WARNING AVOID DEATH OR SERIOUS INJURY Death or serious injury can result from a fan blade failure. Never pull or pry on the fan. This can damage the fan blade(s) and cause fan failure. NOTE: Manually rotate the crankshaft by using a wrench on the accessory drive pulley nut. Figure 31 FG020726 1. An inspection of the cooling fan is required daily. Check for cracks, loose bolts, bent or loose blades, and for contact between the blade tips and the fan shroud. Check the fan to make sure it is securely mounted. Tighten the bolts if necessary. Replace any fan that is damaged.
Inspection, Maintenance and Adjustment 4-31 DX225LC-3 Reference Number Description 1 Point 2 Adapter 3 Pin