GENERAL Safe Operation is Operator's Responsibility Only trained and authorized personnel should operate and maintain the machine. Follow all safety rules, regulations and instructions when operating or performing maintenance on machine. Do not operate machine if you are under the influence of drugs or alcohol. An operator who is taking prescription drugs must get medical advice to determine if he or she can safely operate a machine. When working with other personnel on a work site, be sure that all personnel know nature of work and understand all hand signals that are to be used. Be sure that all guards and shields are installed in their proper location.
Have guards and shields repaired or replaced immediately if damaged. Be sure that you understand the use and maintenance of all safety features such as safety lock lever and seat belt. Use them properly. Never remove, modify or disable any safety features. Always keep them in good operating condition. Always check for and know the location of underground and overhead utility lines before excavating. Failure to use and maintain safety features according to instructions in this manual, Safety Manual and Shop Manual can result in death or serious injury. Know Your Machine Know how to operate your machine. Know the purpose of all controls, gauges, signals, indicators and monitor displays.
Know the rated load capacity, speed range, braking and steering characteristics, turning radius and operating clearances. Keep in mind that rain, snow, ice, loose gravel, soft ground, slopes etc., can change operating capabilities of your machine. DX225LC-3 Safety 1-16