Proper Work Tools and Attachments Only use work tools and attachments that are recommended by DOOSAN for use on DOOSAN machines. When installing and using optional attachments, read instruction manual for attachment, and general information related to attachments in this manual. Because DOOSAN cannot anticipate, identify or test all attachments that owners may want to install on their machines, contact DOOSAN for written authorization and approval of attachments, and their compatibility with optional kits. Attachments and attachment control systems that are compatible with the machine are required for safe and reliable machine operation.
Do not exceed maximum operating weight (machine weight plus attachment) that is listed on ROPS certification plate. Make sure that all guards and shields are in place on machine and on work tool. Depending on type or combination of work equipment, there is a potential that work equipment could interfere with the cabin or other parts of machine. Before using unfamiliar work equipment, check if there is any potential of interference, and operate with caution. While you are performing any maintenance, testing, or adjustments to attachments, stay clear of the following areas: cutting edges, pinch points, and crushing surfaces. Never use attachment as a work platform or manlift.
Contact your DOOSAN distributor about auxiliary hydraulic kits for attachments installation. If you are in doubt about compatibility of a particular attachment with a machine, consult your DOOSAN distributor. Pressurized Fluids Pressurized air or fluids can cause debris and/or fluids to be blown out. This could result in death or serious injury. Immediately after operations are stopped, coolant, engine oil, and hydraulic oil are at their highest temperatures and the radiator and hydraulic tank are still under pressure. Always wait for temperature to cool down. Follow specified procedures when attempting to remove caps, drain oil or coolant, or replacing filters.
Always wait for temperature to cool down, and follow specified procedures when performing these operations. Failure to do so can result in death or serious injury. FG018457 Figure 4 When pressurized air and/or pressurized water is used for cleaning, wear protective clothing, protective shoes, and eye protection. Eye protection includes goggles or a protective face shield. Pressure can be trapped in a hydraulic system and must be relieved before maintenance is started. Safety 1-17 DX225LC-3