Check Operation of All Controls and Linkages IMPORTANT Cold weather operation requires that operator fully warm up the hydraulic oil before beginning machine operation. Follow all warm up instructions listed in the Operating Instruction section of this manual. Make sure to cycle oil through all the components, including all cylinders, both travel motors and the swing motor. Cold hydraulic oil in the lines and components needs to be warmed before beginning full operation. If this is not done, damage to the cylinders or hydraulic motors can occur. 1. With the engine at rated speed, operate all the controls. 2. Follow cold weather hydraulic system warm-up procedures. 3.
Note any slow operations or unusual movements. Determine the cause and repair before operating. Inspection, Maintenance and Adjustment 4-35 DX225LC-3