50 HOUR / WEEKLY SERVICE Perform All Daily Service Checks Grease Arm and Bucket Joint Pins Grease every 10 hours for first 100 hours and every 50 hours thereafter. NOTE: If the unit has been running or working in water, the front attachment must be greased on a 10 hour/daily basis. Position machine as shown below and lower the front attachment to the ground and stop engine. Press the grease fitting and inject grease with the grease gun on the marked point. After greasing, clean off the old grease that has been purged.
FG020112 D C A B, E Figure 35 DX225LC-3 Inspection, Maintenance and Adjustment 4-36 Reference Number Description A Arm Link Joint Pin (1 Point) B Link Joint Pin (2 Points) C Arm Bucket Joint Pin (1 Point) Reference Number Description D Bucket Link Joint Pin (1 Point) E Bucket Cylinder Rod Pin (1 Point)