A. Arm link joint pin (1 point) B. Link joint pin (2 points) C. Arm bucket joint pin (1 point) A D. Bucket link joint pin (1 point) B D C FG019633 Figure 36 E. Bucket cylinder rod pin (1 point) E Figure 37 FG019634 Grease Swing Bearing 1. Park machine on firm and level ground. Lower the front attachment to the ground and stop engine. 2. There are two grease fittings for the swing bearing. Do not over lubricate. Purge old grease with new. Remove all purged grease. Figure 38 FG020069 Inspection, Maintenance and Adjustment 4-37 DX225LC-3