Doosan DX225LC-3 — Check Engine Fan and Alternator Belts Tension

G. Bucket cylinder head pin (1 point) G FG019638 Figure 47 Check Engine Fan and Alternator Belts Tension Cooling Fan Alternator A Measure Point IMPORTANT Water Pump Tension Idler A loose fan belt can cause engine overheating, poor charging, and/or premature belt wear. A belt that is too tight can cause damage to the water pump, alternator bearing, or belt. Compressor Crankshaft Figure 48 EX1300484 1. Inspect every 250 hours. (Inspect after first 50 hours of operation.) 2. With the engine shut off, check the tension of the fan belt by pressing downwards on the belt, midway between the fan pulley and alternator pulley. The belt should flex.

To adjust the belt, loosen the alternator adjustment plate bolts, adjust the belt tension and retighten the bolts. Cooling Fan Alternator A Measure Point Water Pump Tension Idler Compressor Crankshaft Figure 49 EX1300485 A 62 - 64 mm 58 - 60 mm DX225LC-3 Inspection, Maintenance and Adjustment 4-42 Model Belt Tension (N) How to Measure (Alterna Depressible Distance (5 kgf) DL06K New 800 ±50 N (82 ±5 kgf) 2.4 mm 62 Used 600 ±50 N (61 ±5 kgf) 3.7 mm 58