Doosan DX225LC-3 — Clean Air-conditioning Outer Filter

Clean Air-conditioning Outer Filter The machine is equipped with an air filtration system which filters out dirt and dust particles from air being circulated into operator's cabin. This filter must be cleaned out. NOTE: If the unit is being operated in a dusty environment, the cleaning and replacement must be performed more frequently. If filter is damaged, replace damaged filter with a new one. WARNING AVOID DEATH OR SERIOUS INJURY All service and inspection of air-conditioning system must be performed with the starter switch in the "O" (OFF) position. WARNING If using compressed air to clean the element, make sure that proper eye protection is worn. AVOID DEATH OR SERIOUS INJURY NOTE:

All right and left call outs are based on the operator being seated in the operator's seat facing the front. 1. Open the cover by using the starter KEY in the left side of the cabin. Figure 57 2. Remove filter (Figure 58) and inspect for any damage. 3. Use compressed air to clean filter. If filter is still dirty, then replace filter. 4. Reassemble in reverse order. FG018330 Figure 58 DX225LC-3 Inspection, Maintenance and Adjustment 4-48 FG018456 18456