Doosan DX225LC-3 — Clean Radiator, Oil Cooler, Intercooler, Fuel Cooler and Air Conditioner Condenser Cores

Clean Radiator, Oil Cooler, Intercooler, Fuel Cooler and Air Conditioner Condenser Cores WARNING AVOID DEATH OR SERIOUS INJURY Using compressed air, steam or water to clean can cause serious injury. Always wear safety goggles, mask and safety shoes during the cleaning precess. Keep personnel and bystanders clear of work area. FG019411 Figure 60 1. Open the rear left door and engine cover and loosen the bolt(s) on the upper cover of oil cooler. 2. Loosen wing bolt(s) and remove dust net from in front of oil cooler and radiator. Figure 61 FG019413 3. Remove wing bolts and plate (Figure 62) between radiator and oil cooler. 4.

Clean the outside of the radiator and oil cooler, intercooler and fuel cooler with compressed air, steam or water. Wash from the outside of the engine compartment towards the inside. Repeat the cleaning process from the inside of the engine compartment towards the outside to remove all dirt and debris. NOTE: Clean dust net and install it after cleaning radiator, oil cooler, intercooler and fuel cooler. Figure 62 FG019432 5. Clean air conditioner condenser core with compressed air, steam or water. IMPORTANT To prevent damage to the cores, apply compressed air from an appropriate distance. Damaged cores can cause leakage or overheating. In dusty conditions, check the cores daily.

FG019433 Figure 63 DX225LC-3 Inspection, Maintenance and Adjustment 4-50