Inspection, Maintenance and Adjustment 4-87 DX225LC-3 Bucket O-ring Replacement WARNING AVOID DEATH OR SERIOUS INJURY Due to possibility of flying metal objects and to avoid death or serious injury, always wear safety helmet, protective gloves and eye protection when changing pins. 1. Inspect bucket O-rings on a routine basis. If worn or damaged, replacement is necessary. FG019862 Figure 148 2. Roll old O-ring (1, Figure 149) onto boss (2, Figure 149) around bucket pin (3, Figure 149). Remove bucket pin and 1 4 2 move arm or bucket link (4, Figure 149) out of way. 3 FG019071 Figure 149 3. Remove old O-ring and temporarily install new O-ring (1, Figure 150) onto bucket boss (2, Figure 150).
Make sure 1 4 2 that O-ring groove on both bucket link (4, Figure 150) and boss have been cleaned. 4. Realign arm or link with bucket pinhole and insert bucket pin (3, Figure 149). FG019074 Figure 150 5. Roll new O-ring (1, Figure 151) into O-ring groove. 1 FG019075 Figure 151