Doosan DX225LC-3 — Excavator Rated Lift Capacity Tables

EXCAVATOR RATED LIFT CAPACITY TABLES WARNING AVOID DEATH OR SERIOUS INJURY Keep bystanders away from the boom cylinder. While operating, boom, arm or bucket hydraulic hoses could burst causing high-pressure oil to spray or sudden lowering of the load or front structure. This could cause death or serious injury. When changing the hydraulic hoses, record the part numbers of the hoses to factory log book. Figure 8 WARNING All rated lift capacities are based on the machine and the load both remaining level at all times. DO NOT EXCEED THE RATED LIFT CAPACITY.

Lifting loads greater than those shown in the rated capacity tables can cause tipping, equipment failure and/or structural failure of the machine. AVOID DEATH OR SERIOUS INJURY Operate the excavator on firm and level ground and surfaces that can support the weight of the excavator and the loads that will be lifted. Avoid operating the excavator, if these conditions exist: Soft or uneven ground. Unlevel terrain. Side loads. Modifications or poor maintenance of the excavator. Failure to lift squarely over the end or over the side of the machine. When a load is in the air, the operator must: Avoid use of uneven slings that can cause side loads when traveling with a load or swinging the load.

Avoid lifting loads that can become unbalanced if the hook line is twisted and starts to rotate. If the surface area of the load is large enough, wind gusts can create side loads. Keep the arm end point directly over the load. Use tag lines on opposite sides of the load to help stabilize the load and prevent side loads caused by wind gusts. DX225LC-3 Specification 7-10