Lifting and Digging The operator is responsible for any load carried when traveling on public roads and while working with the machine. Keep loads secure so they do not fall off while operating. Do not exceed maximum load for the machine. Machine operation will be affected when center of gravity changes, caused by extended loads and different attachments. To lift loads safely when in digging mode, the following must be evaluated by the operator and work site crew. Condition of ground support. Excavator configuration and attachments. Weight, lifting height and swing radius. Safe rigging of load. Proper handling of suspended load. Always watch load.
Bring load close to the machine before traveling any distances or swinging load. Lifting capacity decreases as load is moved further from the machine. Set tracks at right angles to road shoulder or drop-off with sprocket at rear when performing operations to make it easier to move away from the work area. Do not suddenly lower, swing, or stop work equipment. Do not move bucket over head of other personnel or over the operator's seat of dump trucks or other hauling equipment. The load may spill or bucket can hit dump truck causing property damage or cause death or serious injury. Safety 1-41 DX225LC-3