Doosan DX225LC-3 — High-voltage Cables

When working on loose or unstable ground, it is important not to dig too deep and to carefully reposition the machine. Do not panic and do not raise bucket, if ground should begin to collapse. Lower work equipment to improve stability of machine. Never dig under machine, if there is a potential of causing a landslide. High-voltage Cables Do not travel or operate machine near electrical cables or overhead power lines. There is a hazard of electric shock, which can cause property damage and result in death or serious injury. The bucket or other attachment does not have to make physical contact with power lines for current to cause an electrocution.

Use a spotter and hand signals to stay away from power lines not clearly visible to operator. On work sites where machine may operate close to electrical cables, always do the following: Remember that electrical voltage determines what the minimum distance is to stay away from the power line. See the following table for minimum distances when working near electrical power lines. Electrical flashover can occur and damage machine and cause death or serious injury. Figure 54 FG018414 Always contact the power company responsible before beginning work near high voltage power lines.

DX225LC-3 Safety 1-66 Voltage Minimum Distance 6.6 kV 3 m (9' 10") 33.0 kV 4 m (13' 1") 66.0 kV 5 m (16' 5") 154.0 kV 8 m (26' 3") 275.0 kV 10 m (32' 10")