Doosan DX225LC-3 — Working in Contaminated Environment

Underground Operation If excavation is in an underground location or in a building, make sure there is adequate overhead clearance, and adequate ventilation. Special equipment and engines may be required in some countries. Contact your DOOSAN distributor for more information.. Check that there is sufficient compartment for machine and load. Move slowly. Make sure that authorities or companies responsible for underground cables, utilities, and electrical lines have been contacted and that their instructions are followed. Also check which rules apply to ground personnel regarding exposing cables, utilities and electrical lines. Figure 55 FG018419 Consider all electrical cables as live.

Working in Water IMPORTANT Do not exceed maximum permissible water depth. The water level must not reach higher than centerline of upper track roller(s) (1, Figure 56). After working in water, lubricate all lubrication points on undercarriage, which have been underwater so water is removed. Check that no water has entered travel gearboxes and undercarriage components. FG018427 1 Figure 56 Working in Contaminated Environment When working within area which is contaminated or where there is a health risk, check local regulations and contact your DOOSAN distributor for assistance with identifying what additional safety precautions need to be taken. Safety 1-67 DX225LC-3