Operation at High Altitudes Operation instructions at high altitudes are the same as those provided for extreme cold. Before operating at high altitudes, engine fuel and air mixture may have to be adjusted according to appropriate engine manual. 1. Check engine operating temperature for evidence of overheating. The radiator cap must make a perfect seal to maintain coolant pressure in cooling system. Perform warming-up operation thoroughly. If machine is not thoroughly warmed up before control levers or control pedals are operated, reaction of machine will be slow. If battery electrolyte is frozen, do not charge battery or start engine with a different power source.
There is a potential hazard that could cause a battery explosion or fire. Before charging or starting engine with a different power source, thaw battery electrolyte and check for any leakage of electrolyte before starting. Operation During Electrical Storms During electrical storms, do not enter or exit machine. If you are off machine, keep away from machine until storm passes. If you are in cabin, remain seated with machine stationary until storm passes. Do not touch controls or anything metal. Exhaust Ventilation Engine exhaust gases can cause unconsciousness, loss of alertness, judgment and motor control. This can result in death or serious injury.
Make sure there is adequate ventilation before starting engine in any enclosed area. Check for and be aware of any open windows, doors or ductwork where exhaust may be carried, or blown by wind, exposing others to hazardous exhaust gases. ARO1770L Figure 57 Ventilation for Enclosed Area If it is necessary to start engine within an enclosed area, or when handling fuel, flushing oil, or paint; open doors and windows to ensure that adequate ventilation is provided to prevent gas poisoning. Diesel engine exhaust contains products of combustion which can be harmful to your health. Always run engine in a well ventilated area. If you are in an enclosed area, vent exhaust to outside.
DX225LC-3 Safety 1-72