CLUTCH BOOSTER DISASSEMBLY.INSPECTION.REASSEMBLY T = N.m (kg-cm) [ft-lb] Disassembly Procedure 1 Remove the push rod and boot. 2 Remove the snap ring. 3 Remove the reaction piston Wlpower piston from the body. (If the fitting is tight, hold reaction piston at its portion before the C - ring.) 4 Remove the reaction piston guide. 5 Remove the reaction piston parts and control valve parts. [Point 11 6 Remove the power piston parts. [Point 21 7 Remove the master cylinder piston parts. [Point 31 8 Remove the flow divider parts. 9 Remove the check ball. Reassembly Procedure The reassembly procedure is the reverse of the disassembly procedure. Note:
Coat hydraulic oil on each part before reassembly. Coat silicone grease on the cylinder cup before reassembly.