Toyota — Clutch

2 - 36 Point Operations [Point 1 I Disassembly: Push the pin connecting the reaction piston with a wire, and remove the reaction piston. Carry out this operation while the control valve seat in the reaction piston is kept slight - ly pressed. [Point 21 Inspection: lnspect the wear on the power piston sliding contact surface. Wear limit: 0.032 mm (0.00126 in) (diametric clearance) [Point 31 Disassembly: Push the master cylinder piston with a round bar to make the pin retaining the piston fall and extract the master cylinder piston. Reassembly: Push the master cylinder piston with a round bar and align the piston slit groove with the body pin hole. Insert the pin. Inspection:

lnspect wear on the master cylinder piston slid - ing contact surface. Wear limit: 0.032 mm (0.0126 in) (diametric clearance)