9 [Point 111 Disassembly: After removing the snap ring with the SST, remove the shaft by tapping its end with a plastic hammer. SST 09905 - 0001 2 Disassembly: Remove the bearing from the output cover. SST 09620 - 3001 0 Reassembly: Install the bearing in the output cover. SST 09608 - 3501 4 Reassembly: Install the oil seal flush with the output cover so as not t o damage its lip. SST 09150 - 10170 - 71 After installation, coat grease on the oil seal lip. [Point 121 Disassembly: SST 09308 - 0001 0