Toyota — Torque Converter

Disassembly Procedure [Clutch Shaft No. I (Reverse)] 1 Remove the forward input gear. 2 Remove the seal ring. 3 Remove the clutch gear. [Point 11 4 Remove clutch shaft No. 1. [Point 21 5 Remove the snap ring. 6 Remove the backing plate, clutch disc, clutch plate and camber plate. [Point 31 7 Remove the clutch return spring. [Point 41 8 Remove the clutch piston. [Point 51 Disassembly Procedure [Clutch Shaft No.2 (Forward)] 1 Remove the shim. 2 Remove the clutch gear (in 2 - speeds torque converter only). [Point 11 3 Remove clutch shaft No.2. [Point 21 4 Remove the clutch gear. [Point 11 5 Remove the snap ring. 6 Remove the backing plate, clutch disc, clutch plate and camber plate.

[Point 31 7 Remove the clutch return spring. [Point 41 8 Remove the clutch piston. [Point 51 Reassembly Procedure The reassembly procedure is the reverse of the disassembly procedure. Note: Coat grease on the seal ring before reassembly. After washing each part, coat torque converter oil sufficiently before reassembly.