[Point 31 Disassembly: Carefully operate so as not to lose the steel ball as it will be ejected by the spring force when the valve body plate cover is removed. Reassembly: Install the stell ball in the correct position. [Point 41 Reassembly: Install the stell ball in the correct position. [Point 51 Disassembly: Use the service bolt to extract the plug. Service bolt size: M8 x 1.25 Reassembly: Coat grease on the O-ring of plug before in - stallation. [Point 61 Disassembly: Use the service bolt to extract the plug. Service bolt size: M8 x 1.25 Reassembly: Coat grease on the O - ring of plug before in - stallation. Inspection: Inspect the orifice valve.
Push the center of the valve a few times light - ly with a finger to confirm smooth movement without sticking.