Toyota — Transmission

[Point 101 Disassemb1y.f .eassembly: Screw in the service bolt into the joint yoke bolt hole and use an appropriate round bar for stop- ping rotation. Remove the stop - per plate set bolt. At the time of reassembly, coat grease on the joint yoke surface in sliding contact with the oil seal. After tightening the bolt, fold the bolt lock plate at 2 places. Disassembly: 50-71 Take a note of the output gear direction. SST 09420 - 201 Disassembly: SST 09950 - 2001 7 Reassembly: Install the output gear with its shouldered boss on the clutch side. [Point 1 1 I Disassembly: SST 09370 - 20270 - 7 1