Toyota — Transmission

Reassembly: Apply MP grease amply on the O-ring before reassembly. Reassembly: lnstall the thrust washer with its oil groove facing the gear. [Point 91 Disassembly: Remove the snap ring for the speed gear bear - ing (on clutch side), and remove the bearing with the SST. SST 09950 - 2001 7 Inspection: Measure the thickness of the reverse idle gear washer. Limit thickness Washer A (clutch side): 2.6 mm (0.102 in) Washer B (differential side): 2.7 mm (0.106 in) Reassembly: Install the thrust plate on the reverse idle side, with its oil groove side facing differential. gear the Reassembly: SST 09370 - 20270 - 7 1