I Reassembly: When assembly the clutch hub and hub sleeve, do not align the joints of the key springs. / Reassembly: Use a new lock nut. Stop shaft rotation by us - ing the width across flats (42 mm (1.65 in)) at the end of the countershaft. Securely caulk the lock nut at 2 places. [Point 81 Inspection: Measure the outside diameter of the trans - idle shaft. Standard shaft outside diameter Clutch side: 32.0 mm (1.260 in) Differential side: 25.0 mm (0.984 in) Limit shaft diameter Clutch side: 31.9 mm (1.256 in) Differential side: 24.9 mm (0.980 in) Inspection: Measure the thrust washer thickness. Limit thickness: 2.7 mm (0.106 in)