Toyota — Differential

1 [Point 101 SST Disassembly: SST 09950 - 2001 7 eassembly: Never install the drive pinion pilot bearing in the wrong direction. The roller stop ring of the bearing shall be on the pinion side. Reassembly: After installing the drive pinion pilot bearing, caulk the tip end of the drive pinion at 3 places. Reassembly: SST 09608 - 3501 4 Reassembly: Adjust the drive pinion bearing starting torque. 1. Install the output gear and tighten the lock nut to the specified torque. 2. Set a torque wrench on the lock nut, and measure the starting torque. Starting torque: 1.2 ton series: 10.79 - 13.24 N-m (110 - 135 kg - cm) ft-lb] 3 ton series:

1 1.28 - 13.73 r7.96 - 9.77 N-m (115 - 140 kg - cm) - 10.13 ft - lb] [8.32 3. If the starting torque does not satisfy the standard make adjustment by changing the shim thickness. Shim thickness: 0.03 - 0.10 - 0.15.0.35 and 0.45 mm (0.0012~0.0039~0.0059~0.0138 and 0.01 77 in)