FRONT AXLE SHAFTmHUB REMOVAL - INSTALLATION Removal Procedure 1 Check the rear wheels. 2 Loosen the front wheel hub nuts. 3 Jack up the frame and support its bottom with a stand or wooden blocks. 4 Remove the front wheels. [Point 11 5 Drain differential oil. 6 Remove the axle shaft. [Point 21 7 Remove the bearing lock nut and lock nut plate. [Point 31 8 Remove the front axle hub Wlbrake drum. [Point 41 9 Remove the oil seal. [Point 51 10 Remove the bearing. 11 Disconnect the brake drum.