Installation Procedure The installation procedure is the reverse of the removal procedure. Note: (08833-00070) on the brake drum set nut before tightening. Adjust the braking performance after installation. Make the vehicle travel in the forward and reverse directions about 10 times and depress the brake pedal to stop the vehicle each time. The tightening torque for each portion is as follows: Coat thread tightener Unit: N - m (kg-cm) [ft-lbl Point Operation I [Point 1 Make the chamfered side face the center Installation: In case of a divided rim wheel, install it, with the head of the divided rim set bolt on the out - er side of the vehicle. Disassembly:
When a wheel is removed for disassembly, always discharge air fully before starting dis - assembly. Reassembly: The divided rim set bolt shall be installed with its head chamfered side facing the center of the wheel. Brake drum set nut (hub bolt set nut) - - 1 ton series: 68.65 88.26 (700 900) 150.65- 86.821 - - 2 ton series: 147.10 186.33 (15 00 1900) [108.53- 137.471 - - 3 ton series: 166.71 205.94 (1700 2100) l123.00-151.941 Bearing lock nut stopper bolt - - 14.71 21.57 (150 220) [10.85- 15.921 Axle shaft set bolt - - 1.2 ton series: 68.65 88.26 (700 900) [50.65- 86.821 - - 3 ton series:
98.07 127.49 (1000 1300) [72.35- 94.061 Combination rim set nut (1.2 ton series only) - - - 1 ton series: 49.03 68.65 (500 700) [36.18 50.651 - - 2 ton series: 1 17.68 176.52 (12 00 1800) [86.82- 130.231 Hub nut (single tire) 1 ton series (divided rim): - - 107.87 196.1 3 (11 00 2000) [79.59- 144.701 1 ton series (side ring rim): - - - 176.52 392.27 (18 00 4000) [130.23 289.401 - - [I - 2 ton series: 176.52 392.27 (18 00 4000) 30.23 289.401 - - - 3 ton series: 294.20 588.40 (3000 6000) [217.05 434.101 Hub nut (double tire) 1 ton series: - - [I - Inside: 176.52 392.27 (18 00 4000) 30.23 289.401 - - [I - Outside: 176.52 392.27 (18 00 4000) 30.23 289.401 2 ton series: - - - Inside:
176.52 392.27 (18 00 4000) [ I 3 0.23 289.401 - - Outside: 176.52; 392.27 (18 00 4000) 1130.23 289.401 3 ton series: - - Inside: 294.20 588.40 (3000 6000) [217.05- 434.101 - - - Outside: 294.20 588.40 (3000 6000) [217.05 434.101