Toyota — Rear Axle

REAR AXLE HUB.STEERING KNUCKLE REMOVAL.INSTALLATION Removal Procedure 1 Remove the rear wheels. (See page 8-6.) [Point 11 2 Remove the hub cap. [Point 21 3 Remove the rear axle hub Wtbearing. [Point 31 4 Remove the bearing and oil seal from the steering knuckle. [Point 41 5 Remove the bearing from the hub. [Point 51 6 Disconnect the tie rod end. [Point 61 7 Remove the king pin lock bolt, and remove the king pin. [Point 71 8 Remove the steering knuckle and thrust bearing. [Point 81 9 Remove the oil seal and bearing from the rear axle beam. [Point 91