Installation Procedure The installation procedure is the reverse of the removal procedure. Note: Coat MP grease on the tilt lock device and each sliding contact portion. Add MP grease through the grease fitting of the steering universal joint. The tightening torque for each portion is as follows: Unit: N-m (kg-cm) ift-lbl I Point Operations SST [Point 1 I Removal: SST 09609 - 2001 1 [Point 21 Removal: The main shaft and joint are fixed by through bolts at the mainshaft shouldered portion as il - lustrated. Therefore, the bolts must be loosened and re - moved. - 1 [Point 31 I 1 Installation: Check the functioning of the tilt lock device.
lock I Left screw Steering universal joint set bolt - - - 17.65 24.52 (180 250) 113.02 18.091 Mast jacket set nut - - - 34.32 53.94 (350 550) [25.32 39.791 Steering wheel set nut - - - 19.61 29.42 (200 300) [14.47 21.711