STEERING GEAR BOX ASSY REMOVAL - INSTALLATION 1 Pitman arm 2 Toe board Removal Procedure 1 Move the pitman arm and drag link coupling position toward the rear side. [Point 11 2 Remove the toe board. 3 Remove the steering universal joint. (See mast jacket removal procedure steps 1 t o 7 on page 9 - 1 1 .) 4 Disconnect the piping. 5 Disconnect the drag link. [Point 21 6 Remove the steering gear box ASSY. Installation Procedure The installation procedure is the reverse of the removal procedure. Note: The tightening torque for each portion is as follows: Unit:
N.m (kg-cm) [ft-lb] Steering gear box set bolt and nut - - - 49.03 78.45 (500 800) L36.18 57.881 Steering universal joint set bolt - - - 17.65 24.52 (18 0 250) [13.02 18.091 Steering wheel set nut - - - 19.61 29.42 (200 300) [14.47 21.711 Drag link end castle nut - - - 1.2 ton series: 68.6 -5 98.07 (700 - 1000) 150.65 - 72.351 3 ton series: 147.10 196.13 (15 00 2000) [108.53 144.701