Toyota — Steering

Disassembly Procedure (Common to 1 - 3 Ton Series) 9 - 1 6 1 Remove the pitman arm. [Point 11 2 Remove the side cover and sector shaft. [Point 21 3 Remove the end cover. , 4 Remove the lock nut. [Point 31 5 Remove the valve body ASSY. [Point 41 6 Remove the top cover. [Point 51 7 Remove the ball screw set. 8 Remove the gear box. [Point 61 Reassembly Procedure The reassembly procedure is the reverse of the disassembly procedure. Note: After reassembly, rotate the shaft of the ball screw set 3 to 4 turns to check smooth rotation with- out uneven or unreasonable movement.

Also check that the shaft of the ball screw set is returned smoothly by the reaction spring force after it is rotated to the lock position. The tightening torque for each portion is as follows: 1 ton series Unit: N-m (kg - cm) [ft-lbl 2.3 ton series Unit:

N.m (kg - cm) [ft-lbl Top cover set bolt - - - 44.13 53.94 (450 550) i32.56 39.791 End cover set bolt - - - 39.23 49.03 (400 500) [28.94 36.181 Side cover set bolt - - - 44.1 3 53.94 (450 550)1 32.56 39.791 Sector shaft adjusting bolt lock nut - - - 29.42 44.13 (300 450) [21.71 32.561 Sector shaft adjusting bolt cap nut - - - 29.42 44.13 (300 450) [21.71 32.561 Pitman arm set nut - - - 156.91 196.13 (16 00 2000) [I 15.76 144.701 Top cover set bolt - - - 34.32 44.13 (350 450) [25.32 32.561 End cover set bolt - - - 34.32 44.13 (350 450) [25.32 32.561 Side cover set bolt - - - 34.32 44.13 (350 450)1 25.32 32.561 Sector shaft adjusting bolt lock nut - - - 24.52 34.32 (250 350) i18.09 25.321 Sector shaft adjusting bolt cap nut - - - 24.52 29.42 (250 300) [18.09 21.711 Pitman arm set nut - - - 156.91 196.13 (16 00 2000) [I 15.76 144.701