1 [Point 41 Disassembly: Disassemble the relief valve only when the relief pressure is abnormal. Inspection: Inspect the relief valve for clogged orifice or foreign matter trapping, and clean the relief valve filter. Filter / [Point 51 Reassembly: Install the oil seal and bearing to the top cover. SST 09620 - 3001 0 SST Reassembly: Coat grease on the oil seal lip. Front side Reassembly: Do not mistake the top cover installing direc - tion. Pay attention to the rib position. (See the il - lustration.) /----', Reassembly: Coat grease on the inside surface of the boot to be installed on top of the top cover. g [Point 61 Disassembly: Remove the bearing on the end cover side of the gear box.
SST 09608 - 2001 2 SST Reassembly: Install the bearing on the end cover side of the gear box. SST 09608 - 2001 2 Disassembly: Remove the bearing and oil seal on the sec - tor shaft side of the gear box. SST 09480 - 1 0 1 70 - 7 1 Reassembly: Install the bearing and oil seal on the sector shaft side of the gear box. SST 09608 - 2001 2 Reassembly: Coat grease on the oil seal lip.