Disassembly Procedure 1 Loosen the rod guide. [Point 11 2 Extract the piston rod Wlpiston. [Point 21 3 Remove the piston. [Point 31 4 Remove the rod guide. 5 Remove the piston rod. [Point 41 6 Remove the cylinder. [Point 51 Reassembly Procedure The reassembly procedure is the reverse of the disassembly procedure. Note: Coat hydraulic oil before reassembly. Coat liquid packing (08833 - 00080) on the threaded portion of the rod guide. Piston lock nut tightening torque T = 1 17.68 - 156.91 (1 200 - 1600 kg - cm) t86.82 - 11 5.76 ft - lb] N-m