1 1 Point Operations Reassembly: After tightening the rod guide, caulk the cyl - inder end face with the rod guide groove se - curely. [Point 21 Reassembly: Compress the piston ring with the SST and insert it into the cylinder. 1 ton series: SST 0961 0 - 41 830 - 7 1 2 ton series: SST 09490 - 20340 - 71 [Point 31 Inspection: Measure the piston ring joint clearance. Measure by inserting the piston ring in the cyl - inder. Standard clearance: 0.05 - 0.25 mm (0.0020 - 0.0098 in) Limit clearance: 0.8 mm (0.031 in) [Paint 41 Inspection: Measure the piston rod outside diameter. - 2 ton series Standard outside diameter: 22 mm (0.87 in) Limit autside diameter:
21.92 mm (0.8634 in) 3 ton series Standard outside diameter: 25 mm (0.98 in) Limit outside diameter: 24.92 mm (0.981 1 in) 1 Inspection: Measure the piston rod bend. I I Limit bend: 0.5 mm (0.020 in)