DISASSEMBLY.INSPECTION.REASSEMBLY (2.3 TON SERIES) 1 Front axle hub 1 0 Brake fluid 11 Brake pipe 1 4 Brake drum Disassembly Procedure 1 Remove the front axle hub. (See the front axle shaft,hub removal section on page 7 - 9.) 2 Remove the hold down spring. [Point 11 3 Remove the pawl lever stopper. [Point 21 4 Remove the pawl lever. 5 Remove the anchor - to - shoe spring. [Point 31 6 Remove the strut lever. [Point 41 7 Remove the adjuster spring and adjusting screw. [Point 51 8 Disconnect the parking brake cable. [Point 61 9 Remove the brake shoe. [Point 71 10 Drain brake fluid. 11 Disconnect the brake pipe 12 Remove the wheel cylinder ASSY. [Point 81 13 Remove the backing plate.
[Point 91 14 Disconnect the brake drum from the hub. [Point 101 (See the front axle shuft,hub removal section on page 7-9.)