Toyota — Brake

1 Reassembly: Coat liquid packing (08826 - 00080) on the shoe hold down pin contact portion the rear side of the backing plate to eliminate any clearance. [Point 21 Inspection: Measure the free length of the actuator spring. Standard free length: 124.5 mm (4.902 in) Limit free length: Replace if there is any clearance in the coil. Reassembly: Use snap ring pliers and install the pawl lever stopper and actuator spring. [Point 31 Disassembly: SST 0971 7 - 2001 0 Inspection: Measure the free length of the anchor - to - shoe spring. Standard free length: 106 mm (4.17 in) Limit free length: Replace if there is any clearance in the coil.