Toyota — Brake

[Point 71 Inspection: Measure the brake lining thickness. Standard thickness: 7.0 mm (0.276 in) Limit thickness: 2.0 mm (0.08 in) Reassembly: Before installing the brake shoe, coat grease on the illustrated portions (6 places in contact with the shoe rim and anchor pin) of the back - ing plate. [Point 81 Inspection: Measure the clearance between the wheel cylinder and piston: Limit piston clearance: 0.145 mm (0.0057 1 in) Reassembly: Coat liquid packing (08826 - 00080) o n the wheel cylinder portion for fitting in the back - ing plate and whole circumference of the set bolt t o eliminate any clearance. [Point 91 Reassembly:

Coat liquid packing (08826 - 00080) on the joint face of the backing plate w i t h the front axle bracket t o eliminate any clearance.