Toyota — Brake

10-19 BRAKING FORCE INSPECTION - ADJUSTMENT 1, Inspect the.braking force by using a brake tester or by the brake test. - Braking distance (no - load state) 2. Adjust the braking force. (1 Repeat forward travel and reverse travel, and adjust the brake shoe clearance. The adjusting screw automatically adjust the brake shoe clearance when the brake pedal is depressed at the time of reverse traveling. (2) When the braking force is insufficient, remove the brake drum and perform inspection as ad - juster malfunction, lining contact defect, foreign matter adhesion on lining surface, brake fluid leakage or other defect is suspected.

(3) When the brake shoe is replaced with a new one, repeat forward travel and reverse travel for running in. 1 ton series 2 ton series 3 ton series - Initial speed of braking kmlh (mph) 18.0 (11 .18) 16.0 (9.94) 19.5 (12.11) Stopping distance m (ft) 5.0 (16.4) or less c t